Stainless Steel 316L Fully Welded 1-Bay, Single or Double Door Enclosure

The stainless steel single or double door fully welded floor standing enclosure range, ALSS, with NEMA4X protection, is available in many different sizes. This enclosure range is well suited for many different applications. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure.

Specification Compliance

Complies to Saudi Aramco specification 34-SAMSS-820 and approved under 9COM numbers 6000002698 (Panel, Control, Instrument, Outdoor) & 6000000819 (Box, Marshalling Box)

Certification Compliance

NEMA4X

Design Basis

Fully welded side panels, rear panel, roof and bottom to provide an integral unit ensuring Ingress Protection is maintained.

Standard Features

All enclosures fitted as standard with 316L handles, hinges, door stay, drain breather, A4 drawing pocket, internal light and door switch bracket.

Material

Enclosure Doors and Body: 2mm or 2.5mm 316L hairline finish

Frame

Anodized aluminium T-slot frame secured with specialised bolts to provide a rigid and robust frame.

Door

Mounted with four hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern.

Lock

Available in options of:
• 3 point latching swinghandle with integral keyed lock
• 3 point latching swinghandle with integral keyed lock and two additional quarter turn compression locks located top and bottom
• L handle with padlock facility and additional six compression latches.

Gland Plates

Removable from inside the enclosure and available in 3-6mm 316L material.

Lifting Eyes

316 stainless steel with a load capacity of 200kg’s each. Bolted into an M12 weld in blind socket ensuring Ingress Protection is maintained once removed. Single bay enclosures fitted with 4 lifting eyes.

Mounting Plates

Double folded 3mm galvanised steel which locks into position. Adjustable in position to any point over the full depth of the enclosure.

Plinth

Available in 100mm, 200mm and 300mm height. 200 and 300mm plinths are one piece welded structures with front and rear access for cable/conduit installation.

Earthing

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Delivery

Supplied bolted to an Aramco specified pallet to allow further crating.

Feature

Stainless steel 316L single bay enclosure with front and/or rear access floor standing enclosures are available in a wide variety of sizes with a NEMA4X degree of protection.

Advantage

Fully welded solution ensures the lifelong integrity of the Ingress Protection classification. The unique frame design allows for 100% flexibility to install any number of components across the full height and depth of the enclosure.

Benefit

Customers can receive enclosures with a short delivery time that match their configuration requirements. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.

Comment

Multiple accessories such as viewing windows, 19” rack systems, door cut-outs, are available to fit seamlessly within the enclosure of your choice.

Item. no.Base Item NumberHeightWidthDepthConfiguration
1ALSS20604020006004001 bay
2ALSS20606020006006001 bay
3ALSS20608020006008001 bay
4ALSS20804020008004001 bay
5ALSS20806020008006001 bay
6ALSS20808020008008001 bay
7ALSS208010200080010001 bay
8ALSS201040200010004001 bay
9ALSS201060200010006001 bay
10ALSS201080200010008001 bay
11ALSS2010102000100010001 bay
ISO 9001:2015 (PDF)Miran ISO 9001:2015 Certificate642 KB
Outdoor Floor Standing Enclusure Specification (PDF)Specification1.8 MB
ExVeritas 19TEST0534 (PDF)ALSS Industrial Outdoor Enclosure Range Certificate478 KB