Complies to Saudi Aramco specification SAES-J-902 and approved under 9COM number 6000000794 (Box: Electrical: Junction; Aluminium; Steel)
(Issued by an independent 3rd party IECEx approved Certification Body)
Fully welded body to provide an integral unit ensuring Ingress Protection is maintained.
All enclosures fitted as standard with 316L Locking System, hinges, drain breather, drawing pocket.
Enclosure – Body: 1.5mm – 2mm 316L hairline finish, Doors: 2mm hairline finish
Mounted with two / three / four hinges allowing left or right hand opening.
Continuous flexible polyurethane gasket UL listed for oil resistance with an operating temperature of -40 to +80 degrees C.
Available in options of:
Removable from the underside of the enclosure and available in 3-6mm 316L material.
3mm galvanised steel which locks into position.
|Wall Mount Brackets||
Fitted as standard with 4 x wall mount brackets fully welded to the enclosure body. Facilitates M12 fixing bolt
Enclosure body and All loose panels such as door and gland plate are earthed with a separate weld on M10 earthing stud as standard.
External M10 earth stud fitted as standard.
Protective packaging to ensure damage free transit.